Start Dosbox with D-Fend Re. Config-File ?

This is a forum section for ideas howto implement and running DOS games in ECC (using DOSBox), this forum wil be temporally here until the problem is solved.
User avatar
Vicman
PLATINUM member
Posts: 1233
Joined: 17 Jun 2007, 16:12
Location: Germany,Bochum

Start Dosbox with D-Fend Re. Config-File ?

Unread post by Vicman » 04 Dec 2009, 21:03

We allready have a small Script for Dosbox in eCC.
But, i don't like the way it works.

Because I normaly use D-Fend Reloaded to archive my Dos-Games, i don't want to install them
again for eCC. (and that is, what i have to do, when using marlborojacl's script.

By the way. It seems he will do not work on this script anymore.
So, this hole Projekt is unfinished by now.
Sadly, I haven't the knowledge, to write a working Script :no:

O.K.
Here's what i've made , and what i need :
@ Phoenix :
I know that is not the right way ('cause maybe diff. crc32) but in this way
my allready (in D-Fend Reloaded Folder) Installed Dos-Games works in eCC.

1. I've deactivated the eCC-Dosbox-Script (works only with *.zip)
2. I've added *.com *.bat *.exe to parse in eCC
3. Parsed my romfolders, where i have my Dosgames installed.
4. Wrote/Edit my Metainfos for the "Dosbox-Starting-executable" for each Game
and delete all other file-extension from the romdb.

Example for the Game A-Train:
[Attachment]
This Game has the Extensions: "AT.EXE" , "A-TRAIN.BAT" and "INFO.EXE"
Now, I've used the "A-TRAIN.BAT" for eCC and delete the two *.exe from eCC (remove Rom from DB)

All (allready) installed Games i've added, are working in eCC, without a Script for Dosbox !

The only Problem is, when you have to mount a CD-Drive (for *.ISO-Files) .
That will not work without a Script......

Question :
Is it possible, to use the template.ini to launch the Dosbox with the Config-Settings from ,e.g. D-Fend Reloaded ?

Meaning :
Example for "3 Skulls of the Toltecs"
Script for Dosbox :
dosbox.eccscript : Run($Emulator & $RomFile)

dosbox-template.ini : using the Config from D-Fend Re. :
Spoiler: show
# Config file for profile "3 Skulls of the Toltecs"

[sdl]
fullscreen=false
fulldouble=false
fullresolution=1280x1024
windowresolution=original
output=overlay
autolock=false
sensitivity=100
waitonerror=true
usecancodes=true
priority=higher,normal
mapperfile=I:\D-Fend Reloaded\mapper.txt

[dosbox]
machine=svga_s3
captures=I:\D-Fend Reloaded\Capture\#\3 Skulls of the Toltecs\
memsize=16

[render]
frameskip=0
aspect=false
scaler=normal2x

[cpu]
core=normal
cputype=auto
cycles=fixed 12000
cycleup=500
cycledown=20

[mixer]
nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
mpu401=intelligent
mididevice=default
midiconfig=

[sblaster]
sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
sbmixer=true
oplmode=auto
oplrate=22050
oplemu=default

[gus]
gus=true
gusrate=22050
gusbase=240
gusirq=5
gusdma=1
ultradir=C:\ULTRASND

[speaker]
pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[dos]
xms=true
ems=true
umb=false
keyboardlayout=GR

[joystick]
joysticktype=none
timed=true
autofire=false
swap34=false
buttonwrap=true

[serial]
serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[autoexec]
@echo off
SET PATH=Z:\
keyb GR 437
mount C "I:\D-FEND~1\VIRTUA~1\"
imgmount D "I:\D-FEND~1\VIRTUA~1\#\3SKULL~1\3SKULL~1.ISO" -t iso -fs iso
C:
cd\
cd \#\3SKULL~2\3SKULLS
Z:\config.com -securemode > nul
call 3SKULLS.BAT
If we can't do it this way, please help finding a Solution !

I want to archive/play my Dosgames in eCC :surrender:
Attachments
A-Train.jpg
3Skulls.jpg
D-Fend Config as template.ini
imagepacks:
Done: Vic20, N64, Philips VG-5000 G7000 G7400, SordM5, Amstrad GX4000, Enterprise 64/128
Progress: Atari 8bit, Dosbox, Exelvision EXL 100
Vicman's eCC-Clips on You Tube

User avatar
te_lanus
ECC Support
Posts: 265
Joined: 25 May 2009, 05:00
Location: Port Elizabeth, South Africa

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by te_lanus » 05 Dec 2009, 05:39

Hi vicman.

I run my dos games like this. Added *.conf to ecc, then command is : H:\Emu\dos\DOSBox-0.73\dosbox.exe
parameters is: -conf %ROM%

thus Nothing strange to add.
Busy with:
image packs:
- EPOCH Super Cassette Vision, Exelvision EXL100
Platforms:
- Cybiko Xtreme
- Matsushita (Panasonic) National JR-200
- PDP-8, PDP-11, TRS-80 Model 100
- Tangerine Microtan 65, Terminal Computer SOL-20, Wang VS

User avatar
Vicman
PLATINUM member
Posts: 1233
Joined: 17 Jun 2007, 16:12
Location: Germany,Bochum

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Vicman » 05 Dec 2009, 11:34

What do you mean with "Added *.conf to ecc" ?
1. From where do you have the *.conf ?
2. In wich Folder of eCC do you put the *.conf ?

Can you please give me an example :oops:

Something like e.g. for A-Train : create the "A-Train.conf" and put it in the same folder, where the Game is ?

Or do you use the Dosbox-script to create the *.conf for each Game ? (but i this case, i have to reinstall all my Games, or not ? ) :pardon:

And does it also work with ISO-Games (CD-Mounted)
imagepacks:
Done: Vic20, N64, Philips VG-5000 G7000 G7400, SordM5, Amstrad GX4000, Enterprise 64/128
Progress: Atari 8bit, Dosbox, Exelvision EXL 100
Vicman's eCC-Clips on You Tube

User avatar
Phoenix
ECC Developer 2006-2016
Posts: 9057
Joined: 27 Aug 2006, 01:17
Location: Deventer, The Netherlands
Contact:

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Phoenix » 05 Dec 2009, 11:42

WARNING if you add the .conf file to ECC, please make sure you add the images on the ISO file !!!

The only solution for this is to create a script that looks for this. conf file.....if exist in same folder?, to play an manage DOS games, is really a big question still today with ECC

1. WE NEED AN DOS DAT FILE IS THERE ANY FOUND ON THE INTERNET???
2. SECOND SOLUTION: is there another frontend/wrapper we can use....

let use think about it.....
Sebastiaan Ebeltjes | ECC Developer 2006-2016 | ECC Forum Admin | Phoenix Interactive WebMaster
[- ECC programs -]
eccUpdate, eccScriptSystem, GtkThemeSelect, DatFileUpdater (DFU), ImagePackCenter (IPC), eccDiagnostics, 3dGallery, iccImageInject
eccKameleonCode, eccCreateStartmenuShotcut, eccThirdPartyConfig (TPC), EmuMoviesDownloader (EMD), eccVideoPlayer
MobyGamesImporter (MGI), ECC Amiga GetGemusConfig.

User avatar
te_lanus
ECC Support
Posts: 265
Joined: 25 May 2009, 05:00
Location: Port Elizabeth, South Africa

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by te_lanus » 05 Dec 2009, 13:48

Conf is added to ecc_dosbox_system.ini. I've attached mine.
1. From where do you have the *.conf ?
I make my own. I use the default one that i rename to game name, and setup everything in the conf file.
2. In wich Folder of eCC do you put the *.conf ?
Mine is x:\Emu\dos\conf\
Or do you use the Dosbox-script to create the *.conf for each Game ? (but i this case, i have to reinstall all my Games, or not ? )
the script that you posted in the OP should work without any problems.
And does it also work with ISO-Games (CD-Mounted)
Should do if the CD is in the CD-drive. It does work with ISO's

here is one I use
Spoiler: show
# This is the configurationfile for DOSBox .
# Lines starting with a # are commentlines.
# They are used to (briefly) document the effect of each option.

[sdl]
# fullscreen: Start dosbox directly in fullscreen.
# fulldouble: Use double buffering in fullscreen.
# fullresolution: What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
# windowresolution: Scale the window to this size IF the output device supports hardware scaling.
# output: What video system to use for output.
# Possible values: surface, overlay, opengl, openglnb, ddraw
# autolock: Mouse will automatically lock, if you click on the screen.
# sensitivity: Mouse sensitivity.
# waitonerror: Wait before closing the console if dosbox has an error.
# priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized. (pause is only valid for the second entry)
# Possible values: lowest, lower, normal, higher, highest, pause
# mapperfile: File used to load/save the key/event mappings from.
# usescancodes: Avoid usage of symkeys, might not work on all operating systems.

fullscreen=true
fulldouble=false
fullresolution=original
windowresolution=original
output=ddraw
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true

[dosbox]
# language: Select another language file.
# machine: The type of machine tries to emulate.
# Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe
# captures: Directory where things like wave, midi, screenshot get captured.
# memsize: Amount of memory DOSBox has in megabytes.

language=
machine=svga_s3
captures=capture
memsize=32

[render]
# frameskip: How many frames DOSBox skips before drawing one.
# aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!.
# scaler: Scaler used to enlarge/enhance low resolution modes. If 'forced' is appended,the scaler will be used even if the result might not be desired.
# Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x

frameskip=0
aspect=false
scaler=none

[cpu]
# core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate.
# Possible values: auto, dynamic, normal, simple
# cputype: CPU Type used in emulation. auto is the fastest choice.
# Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch
# cycles: Amount of instructions DOSBox tries to emulate each millisecond. Setting this value too high results in sound dropouts and lags. Cycles can be set in 3 ways:
# 'auto' tries to guess what a game needs.
# It usually works, but can fail for certain games.
# 'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails.
# (Example: fixed 4000)
# 'max' will allocate as much cycles as your computer is able to handle
#
# Possible values: auto, fixed, max
# cycleup: Amount of cycles to increase/decrease with keycombo.
# cycledown: Setting it lower than 100 will be a percentage.

core=auto
cputype=auto
cycles=max
cycleup=500
cycledown=20

[mixer]
# nosound: Enable silent mode, sound is still emulated though.
# rate: Mixer sample rate, setting any devices higher than this will probably lower their sound quality.
# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000
# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
# Possible values: 2048, 4096, 8192, 1024, 512, 256
# prebuffer: How many milliseconds of data to keep on top of the blocksize.

nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
# mpu401: Type of MPU-401 to emulate.
# Possible values: intelligent, uart, none
# device: Device that will receive the MIDI data from MPU-401.
# Possible values: default, win32, alsa, oss, coreaudio, coremidi, none
# config: Special configuration options for the device driver. This is usually the id of the device you want to use. See README for details.

mpu401=intelligent
device=default
config=

[sblaster]
# sbtype: Type of sblaster to emulate.
# Possible values: sb1, sb2, sbpro1, sbpro2, sb16, none
# sbbase: The IO address of the soundblaster.
# Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300
# irq: The IRQ number of the soundblaster.
# Possible values: 7, 5, 3, 9, 10, 11, 12
# dma: The DMA number of the soundblaster.
# Possible values: 1, 5, 0, 3, 6, 7
# hdma: The High DMA number of the soundblaster.
# Possible values: 1, 5, 0, 3, 6, 7
# mixer: Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
# Possible values: auto, cms, opl2, dualopl2, opl3, none
# oplrate: Sample rate of OPL music emulation.
# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000

sbtype=sbpro1
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050

[gus]
# gus: Enable the Gravis Ultrasound emulation.
# gusrate: Sample rate of Ultrasound emulation.
# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000
# gusbase: The IO addresses of the Gravis Ultrasound.
# Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300
# irq1: The first IRQ number of the Gravis Ultrasound. (Same IRQs are OK.)
# Possible values: 3, 5, 7, 9, 10, 11, 12
# irq2: The second IRQ number of the Gravis Ultrasound. (Same IRQs are OK.)
# Possible values: 3, 5, 7, 9, 10, 11, 12
# dma1: The first DMA addresses of the Gravis Ultrasound. (Same DMAs are OK.)
# Possible values: 0, 1, 3, 5, 6, 7
# dma2: The second DMA addresses of the Gravis Ultrasound. (Same DMAs are OK.)
# Possible values: 0, 1, 3, 5, 6, 7
# ultradir: Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.

gus=false
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker: Enable PC-Speaker emulation.
# pcrate: Sample rate of the PC-Speaker sound generation.
# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000
# tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
# Possible values: auto, on, off
# tandyrate: Sample rate of the Tandy 3-Voice generation.
# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000
# disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).

pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=false

[joystick]
# joysticktype: Type of joystick to emulate: auto (default), none,
# 2axis (supports two joysticks),
# 4axis (supports one joystick, first joystick used),
# 4axis_2 (supports one joystick, second joystick used),
# fcs (Thrustmaster), ch (CH Flightstick).
# none disables joystick emulation.
# auto chooses emulation depending on real joystick(s).
# Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none
# timed: enable timed intervals for axis. (false is old style behaviour).
# autofire: continuously fires as long as you keep the button pressed.
# swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.
# buttonwrap: enable button wrapping at the number of emulated buttons.

joysticktype=none
timed=true
autofire=false
swap34=false
buttonwrap=true

[serial]
# serial1: set type of device connected to com port.
# Can be disabled, dummy, modem, nullmodem, directserial.
# Additional parameters must be in the same line in the form of
# parameter:value. Parameter for all types is irq.
# for directserial: realport (required), rxdelay (optional).
# (realport:COM1 realport:ttyS0).
# for modem: listenport (optional).
# for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
# transparent, port, inhsocket (all optional).
# Example: serial1=modem listenport:5000
# Possible values: dummy, disabled, modem, nullmodem, directserial
# serial2: see serial1
# Possible values: dummy, disabled, modem, nullmodem, directserial
# serial3: see serial1
# Possible values: dummy, disabled, modem, nullmodem, directserial
# serial4: see serial1
# Possible values: dummy, disabled, modem, nullmodem, directserial

serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[dos]
# xms: Enable XMS support.
# ems: Enable EMS support.
# umb: Enable UMB support.
# keyboardlayout: Language code of the keyboard layout (or none).

xms=true
ems=true
umb=true
keyboardlayout=none

[autoexec]
# Lines in this section will be run at startup.
mount c H:\Emu\dos\dosroot\hd
imgmount d G:\Isos\cricket.ISO -t cdrom

c:\
path=c:\bin;z:\;
cd cricket
cricket
exit
Attachments
ecc_dosbox_system.ini
(86 Bytes) Downloaded 40 times
Busy with:
image packs:
- EPOCH Super Cassette Vision, Exelvision EXL100
Platforms:
- Cybiko Xtreme
- Matsushita (Panasonic) National JR-200
- PDP-8, PDP-11, TRS-80 Model 100
- Tangerine Microtan 65, Terminal Computer SOL-20, Wang VS

User avatar
te_lanus
ECC Support
Posts: 265
Joined: 25 May 2009, 05:00
Location: Port Elizabeth, South Africa

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by te_lanus » 05 Dec 2009, 13:51

Phoenix wrote:WARNING if you add the .conf file to ECC, please make sure you add the images on the ISO file !!!

The only solution for this is to create a script that looks for this. conf file.....if exist in same folder?, to play an manage DOS games, is really a big question still today with ECC
yip as the crc is not fixed
1. WE NEED AN DOS DAT FILE IS THERE ANY FOUND ON THE INTERNET???
None that I know of
2. SECOND SOLUTION: is there another frontend/wrapper we can use....
I really don't know, I use eCC to launch my dos games
let use think about it.....
:-k
Busy with:
image packs:
- EPOCH Super Cassette Vision, Exelvision EXL100
Platforms:
- Cybiko Xtreme
- Matsushita (Panasonic) National JR-200
- PDP-8, PDP-11, TRS-80 Model 100
- Tangerine Microtan 65, Terminal Computer SOL-20, Wang VS

User avatar
Vicman
PLATINUM member
Posts: 1233
Joined: 17 Jun 2007, 16:12
Location: Germany,Bochum

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Vicman » 05 Dec 2009, 14:09

thanks te_lanus, i'll try it out ;)

@Phoenix :
Phoenix wrote: 1. WE NEED AN DOS DAT FILE IS THERE ANY FOUND ON THE INTERNET???
I have a clrmame.dat from the "DOSCollection v0.8 (2007-06-16)"

You can get this from Pleasuredome. (It's FREE for DL - meaning : no Ratio counting)
This DosCollection has about 17 GB (3597 games from 1981-1996)
(There are some "Virus-messages" when checking this Torrent)

I do also have the DOS Collection "Memories Projekt" (about 8 GB) - but no clrmame.Dat-File

btw.
Some Guys on Pleasuredom are working on a new Dos-Collection ;)
2. SECOND SOLUTION: is there another frontend/wrapper we can use....
I use the Frontend "D-Fend Reloaded" - for me , the best Frontend for Dos-Games
But i also want to archive them in eCC :D

Other good Frontend should be "D.O.G."

Links :
D-Fend re.
http://dfendreloaded.sourceforge.net/index.html

D.O.G.
http://www.freewebs.com/erikgg/
imagepacks:
Done: Vic20, N64, Philips VG-5000 G7000 G7400, SordM5, Amstrad GX4000, Enterprise 64/128
Progress: Atari 8bit, Dosbox, Exelvision EXL 100
Vicman's eCC-Clips on You Tube

User avatar
Vicman
PLATINUM member
Posts: 1233
Joined: 17 Jun 2007, 16:12
Location: Germany,Bochum

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Vicman » 05 Dec 2009, 17:47

te_lanus wrote: ...Conf is added to ecc_dosbox_system.ini. I've attached mine...
...Should do if the CD is in the CD-drive. It does work with ISO's...here is one I use
Thank you te_lanus :happy:

All works fine with this "*.conf" - Trick ;)
also cd/Iso-mounting !

The only problem is to create an Imagepack for all User...'cause diff. Checksums...
But for me it works fine, and i can archive my DosGames in eCC. And this is cool :cool:
imagepacks:
Done: Vic20, N64, Philips VG-5000 G7000 G7400, SordM5, Amstrad GX4000, Enterprise 64/128
Progress: Atari 8bit, Dosbox, Exelvision EXL 100
Vicman's eCC-Clips on You Tube

User avatar
Jarlaxe
ECC Support
Posts: 96
Joined: 29 Aug 2008, 19:12
Location: Barcelona, Spain

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Jarlaxe » 06 Dec 2009, 11:28

Hi !

Please, can give an example of a file *.conf ??

How i can create this file and must contain inside?

Thankssss! :sweatdrop:

User avatar
Vicman
PLATINUM member
Posts: 1233
Joined: 17 Jun 2007, 16:12
Location: Germany,Bochum

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Vicman » 06 Dec 2009, 12:39

Hi Jarlaxe,
Because i allready have archived my DosGames in DFend-Reloaded, i used that *.conf - file.

1. First, use te_lanus' ecc_dosbox.ini
2. I have put my *.conf-files in ecc/user/dosbox/roms (but you can put them, where you want)
3. parse your "config's" in eCC
4. Set emulator config. for dosbox & use -conf %ROM%

Config-File for Dosgame "2Fast4U" : (game is installed , no iso mounted)
Spoiler: show
[sdl]
fullscreen=false
fulldouble=false
fullresolution=1280x1024
windowresolution=original
output=overlay
autolock=true
sensitivity=100
waitonerror=true
usecancodes=true
priority=higher,normal
mapperfile=E:\D-Fend Reloaded\mapper.txt

[dosbox]
machine=svga_s3
captures=
memsize=16

[render]
frameskip=0
aspect=false
scaler=normal2x

[cpu]
core=auto
cputype=auto
cycles=auto
cycleup=500
cycledown=20

[mixer]
nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
mpu401=intelligent
mididevice=default
midiconfig=

[sblaster]
sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
sbmixer=true
oplmode=auto
oplrate=22050
oplemu=default

[gus]
gus=true
gusrate=22050
gusbase=240
gusirq=5
gusdma=1
ultradir=C:\ULTRASND

[speaker]
pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[dos]
xms=true
ems=true
umb=true
keyboardlayout=GR

[joystick]
joysticktype=none
timed=true
autofire=false
swap34=false
buttonwrap=true

[serial]
serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[autoexec]
@echo off
SET PATH=Z:\
keyb GR 437
mount C "E:\D-FEND~1\VIRTUA~1\"
C:
cd\
cd \#\2FAST4~1
Z:\config.com -securemode > nul
BIFI.EXE
Config-File for "3 Skulls of the Toltecs" (Game is Installed, ISO is needed)
Spoiler: show
[sdl]
fullscreen=false
fulldouble=false
fullresolution=1280x1024
windowresolution=original
output=overlay
autolock=false
sensitivity=100
waitonerror=true
usecancodes=true
priority=higher,normal
mapperfile=E:\D-Fend Reloaded\mapper.txt

[dosbox]
machine=svga_s3
captures=
memsize=16

[render]
frameskip=0
aspect=false
scaler=normal2x

[cpu]
core=normal
cputype=auto
cycles=fixed 12000
cycleup=500
cycledown=20

[mixer]
nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
mpu401=intelligent
mididevice=default
midiconfig=

[sblaster]
sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
sbmixer=true
oplmode=auto
oplrate=22050
oplemu=default

[gus]
gus=true
gusrate=22050
gusbase=240
gusirq=5
gusdma=1
ultradir=C:\ULTRASND

[speaker]
pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[dos]
xms=true
ems=true
umb=false
keyboardlayout=GR

[joystick]
joysticktype=none
timed=true
autofire=false
swap34=false
buttonwrap=true

[serial]
serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[autoexec]
@echo off
SET PATH=Z:\
keyb GR 437
mount C "E:\D-FEND~1\VIRTUA~1\"
imgmount D "E:\D-FEND~1\VIRTUA~1\#\3SKULL~1\3SKULL~1.ISO" -t iso -fs iso
C:
cd\
cd \#\3SKULL~2\3SKULLS
Z:\config.com -securemode > nul
call 3SKULLS.BAT
Attachments
2fast4u & 3 Skulls.jpg
Where i've put my *.conf
2fast4u & 3 Skulls.jpg (16.24 KiB) Viewed 2138 times
2fast4u.jpg
My 2fast4u - Folder
3skulls-folder.jpg
My 3Skulls Folder
3skulls-folder.jpg (12.71 KiB) Viewed 2138 times
3skulls-folder-game.jpg
3Skulls :Installed Game-Folder
emu-conf.jpg
Emu-Config
imagepacks:
Done: Vic20, N64, Philips VG-5000 G7000 G7400, SordM5, Amstrad GX4000, Enterprise 64/128
Progress: Atari 8bit, Dosbox, Exelvision EXL 100
Vicman's eCC-Clips on You Tube

User avatar
Vicman
PLATINUM member
Posts: 1233
Joined: 17 Jun 2007, 16:12
Location: Germany,Bochum

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Vicman » 06 Dec 2009, 13:05

imagepacks:
Done: Vic20, N64, Philips VG-5000 G7000 G7400, SordM5, Amstrad GX4000, Enterprise 64/128
Progress: Atari 8bit, Dosbox, Exelvision EXL 100
Vicman's eCC-Clips on You Tube

User avatar
Jarlaxe
ECC Support
Posts: 96
Joined: 29 Aug 2008, 19:12
Location: Barcelona, Spain

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Jarlaxe » 06 Dec 2009, 13:19

Greeeeeeeat Vicman!

Works perfectly! Very very thanks! =D>

User avatar
Vicman
PLATINUM member
Posts: 1233
Joined: 17 Jun 2007, 16:12
Location: Germany,Bochum

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by Vicman » 06 Dec 2009, 13:28

Thanks goes to te_lanus :D

btw.
if there is a possibility, to "change" the "*.conf-checksum" (crc32) , we can make an Imagepack for this Dosbox-Solution... :-k
maybe it's possible with clrmame..to rewrite/get another crc32.....
imagepacks:
Done: Vic20, N64, Philips VG-5000 G7000 G7400, SordM5, Amstrad GX4000, Enterprise 64/128
Progress: Atari 8bit, Dosbox, Exelvision EXL 100
Vicman's eCC-Clips on You Tube

User avatar
te_lanus
ECC Support
Posts: 265
Joined: 25 May 2009, 05:00
Location: Port Elizabeth, South Africa

Re: Start Dosbox with D-Fend Re. Config-File ?

Unread post by te_lanus » 06 Dec 2009, 18:28

Vicman wrote:Thanks goes to te_lanus :D
:happy:
btw.
if there is a possibility, to "change" the "*.conf-checksum" (crc32) , we can make an Imagepack for this Dosbox-Solution... :-k
maybe it's possible with clrmame..to rewrite/get another crc32.....
I'm not so sure as crc is dependent on a lot of stuff that would differ from one machine to another
Busy with:
image packs:
- EPOCH Super Cassette Vision, Exelvision EXL100
Platforms:
- Cybiko Xtreme
- Matsushita (Panasonic) National JR-200
- PDP-8, PDP-11, TRS-80 Model 100
- Tangerine Microtan 65, Terminal Computer SOL-20, Wang VS

Locked

Who is online

Users browsing this forum: No registered users and 1 guest